Simple Repairs for Your LED Flashlight

by | |

Working with flashlights, nosotros at FlashlightZ have seen a whole host of different issues with flashlights. Nonetheless, many issues that nosotros see have a rather elementary solution. It can be aggravating sending your flashlight in for repairs and having to wait for its returns. Earlier yous call in your warranty, you may be able to ready the problem by checking for these easy-to-set up problems.

Check the Batteries

tenergy-2600-compressor.jpg

It's always all-time to first with the simplest solution start which would be the battery. If your flashlight has a dim or weak light or just won't turn on, it could be the battery. Bank check the bombardment in the flashlight to brand sure that it still has accuse in it. You might just accept to replace or charge the bombardment. If the batteries accept charge then audit the batteries advisedly for any leaks. If they are leaking, exist sure to dispose of them properly and replace them with brand spankin' new batteries.

Bank check the O-ring

IMG_20160810_121459-02-compressor.jpeg

This is really a very common outcome if your flashlight wont' turn on at all. Most LED flashlights come with an o-band already on both the tail and head of the flashlight as you can encounter in the image above with the Klarus XT2C body. Some flashlights, like the Armytek Viking Pro, come with two o-rings on the head. However, many flashlights won't plow on if at that place are two or more o-rings at the caput or tail. Check to make sure in that location is just ane o-ring at the head and 1 o-ring at the tail. If, for some reason, there is more than one, remove however many extra there are and tighten the tail and head of the flashlight to see if this fixes the problem.

Some other issue can arise with the o-band if your flashlight has a tactical ring. The tactical ring should be placed before the o-band. In other words, the tactical ring should be closer to the caput of the flashlight than the o-ring. If the o-band is placed in forepart of the tactical ring the tail cap won't be able to tighten all the way, preventing the flashlight from turning on.

Check for Clay

IMG_20160810_121525-01-compressor.jpeg

This is a very of import maintenance routine, especially if y'all take your flashlight on outdoor excursions. If your flashlight is flickering there could be dirt getting in the way of the electrical current. Yous want to brand certain your flashlight is clean of crud, particularly within the body, head, and tail. Accept your flashlight autonomously and inspect and clean each piece thoroughly. Take a q-tip with some rubbing alcohol and carefully clean each slice. Brand sure not to use likewise much rubbing alcohol because information technology tin can impairment the inside of the flashlight. But using besides much with a q-tip is a pretty difficult thing to do.

In that location y'all have information technology! Hopefully these few steps will forbid you from having to go through the procedure of sending your flashlights in for repairs. However, if none of these steps work for you and so definitely brand sure to apply that warranty to go your flashlight working in tip pinnacle shape.

This entry was posted in no categories.